Priority Energy, Aeroseal for New Construction, IL

Fast Duct Sealing and Guaranteed Code Compliance!

Aeroseal is the quickest and most effective method to test and seal ductwork and meet today’s stricter building code requirements.

With Aeroseal, you will pass the IECC 2015 duct leakage test every time!
Priority Energy GUARANTEES IT!

Chicago-area architects, builders and HVAC contractors have begun specifying Aeroseal duct sealing from the initial stage of their new construction projects and high performance homes. The sealing process is so much faster and less labor intensive than traditional tape and mastic that it can actually save you money. The computerized system efficiently measures leakage, seals and tests at the same time so results are known immediately.  

Why do the EPA and the U.S. DOE recommend Aeroseal? Because properly sealed ducts are such an important component of indoor comfort, indoor air quality, energy efficiency and lower utility costs! Go to our Aeroseal Facts and Benefits page for additional health benefits!

Aeroseal is UL 1381 certified and approved by prestigious standards bodies such as ANSI/BPI (Building Performance Institute), NGBS (National Green Building Standard) and FEMP (Federal Energy Management Program). In addition, Aeroseal is an approved duct testing method by the State of Illinois.

Seal and Verify in One Step

New construction homes with ductwork in unconditioned spaces, like the attic or basement, must pass a duct leakage test, under the IECC 2015 building code requirements. To save time and eliminate guess work, more and more contractors are choosing Priority Energy and Aeroseal to get the results they need FAST!  Don’t let the tape and mastic duct sealing method slow down your production schedule. Priority Energy can Aeroseal most new construction homes in less than one day and with only a few days advance notice.

Meet Energy Star and Advanced Certification Requirements

Congratulations!  ENERGY STAR rated homes and buildings are built and tested to outperform the typical American home in comfort, energy efficiency and durability. Aeroseal duct sealing is the only way to achieve the stricter leakage requirement. (Priority Energy’s certified HERS Raters can work with your builder or architect to achieve the energy efficiency requirements for ENERGY STAR certification.)

Seal and Save

Don’t be fooled into believing that bigger is better! Properly sealed ductwork and an accurately-sized HVAC system will provide far better year-round comfort and long term structural durability than a larger-than-needed, more expensive system. In fact, an HVAC system that is oversized can cause humidity problems and discomfort, and will be more expensive to operate. For maximum comfort and durability, have your HVAC system designed by our professional staff and use Aeroseal to seal in success. Priority Energy’s Mechanical Design services (MEP) can provide your Manual J,D and S reports to get your project started right!

The most cost-effective time to seal ductwork in new construction is BEFORE the furnace and drywall are installed. We’ll help coordinate the installation. Tell your builder or HVAC contractor to call Priority Energy about Aeroseal today at 800-737-2299.

  • Thank you again and you will be the first person I call if I need additional part or service from your company.
  • I just wanted to send this message to all you and say GREAT JOB!  We had a rough inspection today and passed for the Woodward Ave. house. The inspector told us "if every house I inspected looked like this one I would be out a job".

    Anonymous Builder
  • We were so impressed with the amount of information the Priority Energy technicians gave us during our ENERGY AUDIT.  If you are buying a house, I would strongly recommend having them do an energy audit on it, in addition to your usual home inspection.

  • Thanks for a super intelligent and deep seminar expertly handled by a staff which was a pleasure to be around. Lunch was superbly and subtly handled.

    A.S. Architect
  • I wanted to thank you for all of your extra time and energy during our BPI training over the last few weeks. You really helped put things in perspective. You are an awesome crew and your facility is a valuable resource for students and the community

    BPI Student, L.E.
  • There is much less dust in the house and the monthly gas and electric charges have been reduced by 10 to 15%.....I'm sure I will see greater savings over a twelve month period......thanks again.

    Aeroseal Client, R.N.
  • Just completed my BPI Field exam for my Quality Control Inspector (QCI) certification renewal at Priority Energy.
    Such a convenient and well-set-up training and test center with caring and knowledgeable staff and proctors! Thanks folks!


    P.R., Ottawa, IL
  • It's been cold here for the past few days and I really feel the difference in heating since the building was Aerosealed! My apartment is so much warmer now. Thank you Priority Energy!


    Miruna; Tenant at Country Manor Apartments, Peru, IL
  • Anytime I can be a reference for all the great work on my (new) house, please let me know.  Priority Energy is outstanding at what they do!

    Executive at Medline Industries, IL

Latest News

Aeroseal VOC Compliance Cert
Recent testing by Berkeley Analytical officially concluded that DUCTSEAL, the Aeroseal  sealant used to seal leaky ductwork is compliant for low volatile organic chemical (VOC) emissions.
Blower Door test at CVS Pharmacy in Glen Ellyn, IL
The newly constructed CVS Pharmacy at the corner of Roosevelt Rd and Park Blvd in Glen Ellyn, IL meets Illinois' energy efficiency requirements and is ready for occupancy!  Priority Energy recently completed the mandatory IECC Blower Door test on the 38,000 s.f.